Electrical Cable

Earth Resistance Clamp On Meter Tester

Transformer Lugs

Stacked Lugs

Turn Prevent

CCTV CABLE

Fire Alarm Cable

MODEL# 810S-120R

MODEL#810SE

MODEL# 810DE

Model# 810S-120R

web price: $249.00 each

MODEL 810S-120R

FAA Approved Lighting

• Single Lamp

• 120VAC

• 116 Watt Lamp

• 8,000 Hour Lamp Life

• FAA L-810 Certified, ETL Tested

• 1 Inch Pipe Mount

Federal Signal Obstruction warning Lights are designed to mark tall structures that present hazards to air navigation. When installed in accordance with FAA AC 70/7460-1, these lights increase the conspicuity of obstructions for pilots flying at night.

Federal Signal Model 810S is a steady burning obstruction light, [FAA Ref. L-810]. The 810S mounts on 1" NPT pipe. For ease of installation and maintenance the fixture is equipped with a stainless steel tether securing the glass dome and a stainless steel band providing tool-free access to the lamp.

The 116 watt lamp is rated for 8000 hours of continuous use. All Federal Signal Obstruction Lights are shipped factory assembled with lamps.

Typical applications include water towers, cellular phone towers, antennas, smoke stacks, skyscrapers, and airport perimeter fencing. For the number and placement of lights, the required duration of operation, and recommendations for specific types of structures, refer to FAA Advisory Circular No. 70/7460-1K.

MODEL 810SE

FAA Approved Lighting

• Single Lamp

• 120VAC

• 116 Watt Lamp

• 8,000 Hour Lamp Life

• FAA L-810 Certified, ETL Tested

• 1 Inch Pipe Mount

• Optional Photo-electric Cell

Federal Signal Obstruction Lights are designed to mark tall structures that present hazards to air navigation. When installed in accordance with FAA AC 70/7460-1, these lights increase the conspicuity of obstructions for pilots flying at night.

Federal Signal Model 810SE is a steady burning obstruction light, [FAA Ref. L-810]. The 810SE Features a die-cast aluminum housing with a wiring enclosure and mounts on 1" NPT pipe. For ease of installation and maintenance the housing is equipped with captive cover screws, a stainless steel tether secures the glass dome and stainless steel band provides tool-free access to the lamp.

An optional photoelectric controller provides automatic light activation at dusk per FAA Specifications. All Federal Signal Obstruction Lights are shipped factory assembled with lamps and options.

The 116 watt lamp is rated for 8000 hours of continuous use. Photoelectric cells are rated at over 5000 on/off operations for years of reliability.

Typical applications include water towers, cellular phone towers, antennas, smoke stacks, skyscrapers, and airport perimeter fencing. For the number and placement of lights, the required duration of operation, and recommendations for specific types of structures, refer to FAA Advisory Circular No. 70/7460-1K.

• Dual Lamps

• 120VAC

• 116 Watt Lamps

• 8,000 Hour Lamp Life

• FAA L-810 Certified, ETL Tested

• 1 Inch Pipe Mount

• Optional Photo-electric Cell

• Optional Transfer Relay

MODEL 810DE

FAA Approved Lighting

Federal Signal Obstruction Lights are designed to mark tall structures that present hazards to air navigation. When installed in accordance with FAA AC 70/7460-1, these lights increase the conspicuity of obstructions for pilots flying at night.

Federal Signal Model 810DE is a steady burning double obstruction light, [FAA Ref. L-810]. The 810DE features a die-cast aluminum housing with a wiring enclosure and mounts on 1" NPT pipe. The corrosion resistant housing is sealed with aviation yellow powdercoat paint and includes stainless steel hardware. For ease of installation and maintenance the housing is equipped with captive cover screws, stainless steel tethers secure the glass domes and stainless steel bands provide tool-free access to the lamp.

An optional photoelectric controller provides automatic light activation as dusk per FAA specifications. The optional transfer relay powers the standby lamp if the operating lamp fails. All Federal Signal Obstruction Lights are shipped factory assembled with lamps and options.

The 116 watt lamps are rated for 8000 hours of continuous use. Photoelectric cells are rated at over 5000 on/off operations for years of reliability.

Typical applications include water towers, cellular phone towers, antennas, smoke stacks, skyscrapers, and airport perimeter fencing. For the number and placement of lights, the required duration of operation, and recommendations for specific types of structures, refer to FAA Advisory Circular No. 70/7460-1K.