Kyland SICOM3000BA intrinsically safe low power consumption Gigabit 6+3G Port managed DIN-Rail Din Rail Hardened industrial Ethernet ethernet switch switches, for industrial information layers in transport, power and mining applications, has passed Mine Safety Certification. Low power consumption, full load consumption less than 5.6W. EMC industrial level 4, specially designed for harsh electromagnetic interference environment. IEC61000-6-2 (Industrial Standards), IEC61850-3 (Substations), IEEE1613 (Electric Power Substations), EN50121-4 (Railway Applications). Web Price Prices Pricing

Web Prices Listed Below.

SICOM3000BA

6+3G Port Gigabit Intrinsically Safe Low Power Consumption Managed Industrial Ethernet Switch

SICOM3000BA series, intrinsicly safe low power consumption Gigabit managed DIN-Rail industrial Ethernet switch, was developed by Kyland for industrial information layers in transport, power and mining applications. It offers three Gigabit fiber/TP ports or three 100M fiber ports and six 100M TP ports. Its fanless ribbed casing design and ability to handle a wide range of temperatures ensure high reliability in extreme industrial environments. Its full load power consumption is less than 5.6W, and it has passed Mine Safety Certification. Based on Kyvision3.0, CLI, WEB interface, it offers concentrative management. The state-of-the-art OPC software enables the switch's management embedded in various industrial systems.

1-800-843-6036

Email us

OnLine Order

Supported Browsers:  IE, SAFARI, CHROME

More Industrial Network Options
SICOM3000BA series, intrinsicly safe low power consumption Gigabit managed DIN-Rail industrial Ethernet switch, was developed by Kyland for industrial information layers in transport, power and mining applications. It offers three Gigabit fiber/TP ports or three 100M fiber ports and six 100M TP ports. Its fanless ribbed casing design and ability to handle a wide range of temperatures ensure high reliability in extreme industrial environments. Its full load power consumption is less than 5.6W, and it has passed Mine Safety Certification. Based on Kyvision3.0, CLI, WEB interface, it offers concentrative management. The state-of-the-art OPC software enables the switch's management embedded in various industrial systems.

SICOM3000BA

6+3G Port Gigabit Intrinsically Safe Low Power Consumption Managed Industrial Ethernet Switch

MTBF
35 years

Warranty
5 Years
Overview
The SICOM3000BA series, intrinsically safe low power consumption Gigabit managed DIN-Rail industrial Ethernet switch, was developed by Kyland for industrial information layers in transport, power and mining applications. It offers three Gigabit fiber/TP ports or three 100M fiber ports and six 100M TP ports. Its fanless ribbed casing design and ability to handle a wide range of temperatures ensure high reliability in extreme industrial environments. Its full load power consumption is less than 5.6W, and it has passed Mine Safety Certification. Based on Kyvision3.0, CLI, WEB interface, it offers concentrative management. The state-of-the-art OPC software enables the switch's management embedded in various industrial systems.
Features
1) Mine safety certification.
2) Low power consumption, full load consumption less than 5.6W.
3) Support DT-Ring Suite (Recovery time<50ms), RSTP/STP(IEEE802.1w/d) redundancy protocol.
4) Flexible network topology supports ring, link, star and tangent ring topologies.
5) Up to 3 1000Base-FX/TX ports or 3 100Base-FX ports.
6) Advanced ring topology protocol avoiding broadcast storm.
7) Support IGMP Snooping, port mirroring, QoS, VLAN.
8) Support multiple management functions including CLI, TELNET, WEB, SNMP V1/V2 and OPC etc.
9) Support centralized management software, network topology generated automatically.
10) Safe MAC and port binding function, support static FDB.
11) Bind width setting function enables port band width limitation.
12) Broadcast storm control.
13) EMC industrial level 4, specially designed for harsh electromagnetic interference environment.
14) Dual 24VDC, 48VDC or 3.3VDC power supply with power alarming function.
15) SICOM series management software: Kyvision3.0.
16) Working temperature: -40°C to 85°C
17) Ribbed Aluminum housing for heat dissipation, fanless design
18) IP40 protection
19) DIN-Rail mounting and wall mounting, embedded module
Standard
IEEE802.3
IEEE802.3U
IEEE802.3X
IEEE802.3Z
IEEE802.1AB
IEEE802.1D
IEEE802.1W
IEEE802.1P
IEEE802.1Q
Store and forward switching mode		 Protocol
Max VLAN quantity/range: 4096
VLAN: Port-based, 802.1Q tag, GVRP mobile VLAN
Port mirroring: Yes
Redundancy protocol: DT-Ring with recovery time less than 50ms
Spanning tree: IEEE802.1D-1998 spanning tree, link back-up,IEEE802.1w(RSTP)
Link binding: 2 group max
IGMP snooping: Yes
SNMP: V1.0/V2.0

QoS
802.1p: Four transmission queue mapping each port
Queue scheduling: WRR, SP, WRED, WFQ, and FIFO		 Service
Diagnostics: LEDs (power, link status, port rate, management status), fault relais(24VDC/1A), RMON(1,2,3, 9RFC1757)
Management: Kyvision
Configuration: WEB, console interface, Telnet, SNMP software
Security: Port security (MAC based and IP based)
Other services: Flow control IEEE 802.3x, OPC, SNTP, PTP(IEEE1588), broadcast storm protection, reverse polarity input protection. Port status query, port flow statistics.

Network
Ring, chain, star and tangent ring network topology.
Interface
Gigabit port: 3 Gigabit SFP interface supports 1000Base-SX/LX/LH/ZX/LC or 10/100/1000Base-T(X), RJ45 connector modules.
Fiber port: 3 100Base-FX(FC/SC/ST connectors).
Copper port: up to 6 10/100Base-TX with RJ45 connectors.
Console: RS232, RJ45		 Performance
MAC Address Table Size: 8K
Backplane switching capacity: 7.2G

Cable
Twisted Pair: 0-100m
Multi Mode Fiber: 1310nm, 0-5km (100Base-FX); 1310nm 0-2km (1000Base-FX)
Single Mode Fiber: 1310nm, 0-40km; 1550nm, 0-80km		 Power Requirements
Power Input: 3.3VDC, 24VDC (18-36VDC), 48VDC(36-72VDC) dual redundant power supplies
Connection Terminal: 6 cores 5.08mm spacing terminals (3.3VDC), 3 cores 3.81mm spacing terminals (24VDC, 48VDC)
Power Consumption: <5.6W(1000Base-FX), <3.99W(100Base-FX)
Physical Characteristics
Casing: IP40 protection, Ribbed Aluminum housing fanless design
Dimensions (WxHxD): 75x140x123 mm (2.95x5.51x4.84 in.) (24VDC, 48VDC), 150x61.5x110mm (5.91x2.42x4.33 in)(3.3VDC)
Weight: 1200g (2.646 pounds)
Installation: DIN-Rail or wall mounting, embeded modules		 Environmental Limits
Operating Temperature: -40 to 85°C(-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 0 to 95% (non-condensing)
 		 MTBF
35 years

Warranty
5 Years
Approvals

IEC61000-4-2(ESD): ±8KV contact discharge, ±15KV air discharge
IEC61000-4-3(RS): 10V/M (80-1000MHz)
IEC61000-4-4(EFT): Power line±4KV, data line±2KV
IEC61000-4-5(Surge): Power line±4KV CM,±2KV DM, Data line ±2KV
IEC61000-4-6(CS):3V(10KHz-150KHz),10V(150KHz-80MHz)
IEC61000-4-8(Power frequency magnetic field):100A/m cont. 1000A/m, 1s to 3s
IEC61000-4-12/18(Damped oscillatory wave):2.5KV CM, 1KV DM

 Approvals

IEC61000-4-10(Damped oscillatory):30A/m
IEC61000-4-16(Common mode conduct):20V cont. 300V, 1s
FCC CFR47 Part 15/EN55022: Class A&B
IEC61000-6-2 (Industrial Standards), IEC61850-3 (Substations), IEEE1613 (Electric Power Substations), EN50121-4 (Railway Applications)

CE,FCC,UL60950,ROHS,Mine Safety Certification
WEB PRICING
SICOM3000BA    
SICOM3000BA-3GX-6TX 3x1000Base SFP port, 
6x10/100Base-TX RJ45,
DIN Rail or Wall Mounting
3.3VDC(150x61.5x110mm)
24VDC, 48VDC (75x140x123 mm)
 		 $1,740.00
SICOM3000BA-6TX
 		 6×10/100Base-TX, RJ45
3.3VDC(150x61.5x110mm)
24VDC, 48VDC (75x140x123 mm)
 		 $1,099.00

 

 

Managed DIN Rail Mountable Industrial Ethernet Switch SICOM Series

SICOM6000

24+4G Port Modular Layer 3 Managed Industrial Ethernet Switch

SICOM4000

24+4G Port Modular Managed Industrial Ethernet Switch

SICOM3016

20 Port Managed Industrial Ethernet Switch

SICOM3000

Gigabit managed DIN-Rail industrial Ethernet switch,

SICOM3000BA

6+3G Port Gigabit Intrinsically Safe Low Power Consumption Managed Industrial Ethernet Switch

SICOM3005

5 Port Serial Server Function Integrated Programmable Industrial Ethernet Switch
 

More Industrial Network Options
 

 

Visit ruggednetworks.net

INNERDUCT

 

 

 

SICOM3000BA

6+3G Port Gigabit Intrinsically Safe Low Power Consumption Network Managed Hardened  Industrial Ethernet Switch

Kyland SICOM3000BA intrinsically safe low power consumption Gigabit 6+3G Port managed DIN-Rail Din Rail Hardened industrial Ethernet ethernet switch switches, for industrial information layers in transport, power and mining applications, has passed Mine Safety Certification. Low power consumption, full load consumption less than 5.6W. EMC industrial level 4, specially designed for harsh electromagnetic interference environment. IEC61000-6-2 (Industrial Standards), IEC61850-3 (Substations), IEEE1613 (Electric Power Substations), EN50121-4 (Railway Applications).

Web Price Prices Pricing

 

 

Prices are subject to change without notice.  Inventory is subject to prior sale.  Product design, specifications & construction are subject to change without notice. Pictures are for general representational purposes and may not represent actual product.

Not Responsible for errors in print, verify all data with us or manufacturer.  Terms & Conditions of sale apply, for a copy contact us.

Products may be discontinued without notice.  Pricing Does Not Include Freight Costs